Toilet Refilling by Itself? Check This First

One look inside the tank tells you the repair you need.
Ads

Lift the lid, then find the thin tube feeding into the overflow pipe (the open pipe in the tank’s middle) — then answer below.

Is the end of that tube clipped above the pipe, or pushed down inside it?
1 · Identify the pattern → 2 · Find the cause → 3 · Fix it

Why this check comes next

A toilet that refills on its own is losing water from the tank while nobody is using it, and the refill kicks in to top it back up. Toilet-part manufacturers describe these refills as a sign that water is escaping from the tank somewhere.

One possible cause takes seconds to rule out and costs nothing: that thin tube pushed too far down into the pipe, where it can siphon water out of the tank. That’s why it’s the first thing to look at.

Ads

What each answer usually means

If the thin tube is pushed down inside the overflow pipe, it can siphon water out of the tank continuously — even when nothing else about the toilet is wrong. This is a common, easy-to-overlook cause behind a toilet that keeps refilling every few minutes, since the tank never settles at a stable water level between flushes. It’s usually a one-minute fix: clip the tube back above the rim of the pipe, which the next page covers.

If the tube is already clipped above the pipe, the intermittent running isn’t coming from siphoning — the tank is losing water another way, most often because the flapper isn’t sealing completely after a flush. That’s the same toilet-runs-every-few-minutes, running-on-and-off pattern, and the next page walks through how to confirm it and fix it.

Find the right next step

Match what you saw inside the tank to the right check.

Tube is pushed down inside the pipeThe refill tube can siphon water out of the tank on its own. See the siphoning check →
Tube is clipped above the pipeRefilling is happening for a different reason, usually the flapper. See the flapper check →

Questions people ask

Why does my toilet keep refilling every few minutes?

Most often because water is slowly leaving the tank between flushes — either siphoning through a refill tube pushed too far into the overflow pipe, or leaking past a flapper that isn’t sealing. The fill valve switches on to top the tank back up each time, which is the running you hear.

Is running on and off the same problem as running non-stop?

No. A toilet running non-stop usually means water is currently overfilling the tank. A toilet that runs intermittently, a few minutes apart, usually means water is slowly escaping between flushes and the tank keeps having to top itself back up.

Can this waste a lot of water if I leave it?

Yes — a toilet that keeps running off and on every few minutes can add up over a full day, even though each individual refill sounds minor. It’s worth checking the cause soon rather than ignoring the pattern.

If there’s water on the floor

Water running inside the tank stays inside the toilet. If you see water on the floor around the toilet, or the bowl rising toward the rim, turn the knob on the wall behind the toilet clockwise until it stops, and call a plumber before doing anything else.

Written by the Fix Editorial Team · Based on toilet-part manufacturer guidance and established home-maintenance sources · Last updated September 27, 2026.
This content provides general household information and does not replace an in-person assessment when one is needed.