You said: the coolant is dropping and you can’t see where it goes.
What’s actually happening
Ads
A coolant leak you can’t see is almost always a small leak that evaporates before it reaches the ground, or a leak inside the car: into the cabin through the heater core, or into the engine past the head gasket.
The order matters. Look for crust first, because it is free and finds most seeps. Then pressure-test, because it makes a highway-only leak show in the driveway. Then UV dye for the seep that still hides. Only if the system loses pressure with nothing visible do you move to the internal-leak tests.
A cooling system pressure tester and a UV dye kit are the two tools every shop uses for exactly this job, and both are inexpensive to own or rent. The four steps below show what a dry system looks like at each point, and what to do when yours isn’t.
Ads
Step 1: Look in the right places, in the right order
What a dry system looks like: a dry engine bay with no colored crust at clamps, the water pump weep hole, the thermostat housing, the radiator seams or the reservoir tank.
Slow leaks evaporate on hot metal before they reach the ground and leave only a chalky white, green or pink crust. The crust is the leak.
Where to look, in order: hose clamps at both ends of every hose · the water pump weep hole under its pulley · the thermostat housing gasket · the seams of the radiator end tanks · the reservoir tank and cap · the heater hoses at the firewall · the freeze plugs on the side of the block.
Free first: Slide a large piece of cardboard under the car overnight. In the morning the drip marks show position and color; front-left, center and right each point to different parts.
Why the ground can stay dry: the system runs at 15–16 psi and well over the boiling point of water; a hairline leak turns to vapor on contact with hot parts.
Step 2: Pressure-test the cold system
What a healthy cooling system has: a cooling system that holds its rated pressure (printed on the cap) for 15 minutes with the engine off and cold.
A pressure tester replaces the cap and pumps the system to its rating while cold, so a leak that only shows on the highway appears in your driveway as a visible drip or a falling gauge.
How to do it: Engine cold. Remove the cap, fit the tester adapter, pump to the psi on your cap and no higher. Watch the gauge for 10–15 minutes and look and listen for drips or hissing.
What the result means: Gauge drops with a visible drip: external leak, follow the drip. Gauge drops with nothing visible: coolant is leaving inside (heater core or head gasket). Gauge holds: the loss was the cap or overfilling.
Never test hot: and never exceed the cap rating; plastic tanks and old hoses can burst.
As an Amazon Associate, Fix earns from qualifying purchases. Product links on this page go to Amazon search results; nothing here needs to be bought if you already have something that does the job.
Recommended: one kit with adapters for your cap type
Cooling system pressure tester kit
Finds a leak that only shows at operating pressure, in ten minutes, in your driveway. Choose a kit whose adapter set includes your radiator or reservoir cap style; many kits also test the cap itself.
Paid link to Amazon search results. Check fitment and the current price on Amazon.
Step 3: UV dye for the leak that still hides
What a healthy cooling system has: a small dose of coolant-safe UV dye in the reservoir and a UV flashlight after a day of normal driving.
Dye glows bright at the exact source under UV light, even where the coolant itself evaporated. It is how many shops find seeps at gaskets and freeze plugs.
How to do it: Add the dye per the bottle, drive normally for a day, then inspect the engine bay in the dark with the UV flashlight and yellow glasses. The glow marks the source.
Look for: dye labeled for coolant (not A/C or oil dye), plus a UV flashlight; combined kits include the glasses.
Shows the source as a bright glow after a day of driving, including seeps that evaporate before you can see them. Choose a coolant-specific dye; the flashlight and glasses come in most kits.
Paid link to Amazon search results. Check fitment and the current price on Amazon.
Step 4: When the leak is inside
What a healthy cooling system has: a pressure test that holds, dry engine bay, and a stable level over two weeks.
If the gauge drops with nothing visible, the coolant is leaving through the heater core into the cabin or past the head gasket into the engine. Both need a different test.
Sweet smell in the cabin or foggy windshield: heater core. See the heater core page.
White exhaust smoke, milky oil or running hot: possible head gasket. A combustion leak test confirms it; see the head gasket page before accepting a quote.
Rather have a shop find it? A coolant leak diagnosis is a standard, low-cost service; RepairPal lists it at roughly $60–$88 nationally (September 2026). Use the search below.
Find an auto repair shop near you
Choose a service to open a live map search around you. Your location is only requested when you tap the button and is never stored by Fix.
Opens Google Maps, a third-party service. Fix doesn’t vet, rank or partner with the shops shown; ask for a written estimate and check reviews.
Your leak-finding kit
What a driver who finds hidden leaks at home has on hand. Tap the box when you already have it. Tap the name to see what to get.
Written by the Fix Editorial Team · Based on manufacturer cooling-system service guidance (Prestone, Gates, Stant) cross-checked against established repair references (RepairPal, Haynes) · Last updated September 30, 2026.
Fix does not provide automotive repair, towing or diagnostic services. Information on this page is general guidance, not a substitute for an inspection by a qualified mechanic. Never open a hot radiator or reservoir cap, and stop driving if the temperature gauge reads hot. Some links are Amazon affiliate links: as an Amazon Associate, Fix earns from qualifying purchases, at no extra cost to you. Price, availability and ratings are set by Amazon and can change at any time.